- Video and images: Design and image by STLFlix. Printed under an STLFlix commercial license. · source
Product images are the designer's renders until I photograph my own print. Colors and finish of your print will differ.
Starving Piranha
by STLFlix
From Drop #63 · released May 2023
$79
This price is an estimate, not final. After you order, I work out the exact cost and email it to you. Nothing is charged until you approve that price and pay.
+ shipping, about $10.50 for one (U.S.), shown separately at checkout · or free local pickup
Made to order: At least 4 weeks. First print of this design: I test-print and dial it in before yours, so allow a few extra days.
Swimming along the riverbed, this hungry piranha is eager to turn the hand that feeds her into her next meal. Who wants to give it a shot? Mind your fingers!
Assemble your carnivore pet fish as follows:
1 - Place "Piranha_Spring_01" and "Piranha_Gear" on "Piranha_Jaw".
2 - Place "Piranha_Spring_02" on the left side of "Piranha_Tooth_Trigger", and then fit the piece in its proper place on "Piranha_Jaw".
3 - Place "Piranha_Tongue" over the assembled mechanism on "Piranha_Jaw".
4 - Fit "Piranha_Axle" on the side of "Piranha_Jaw", joining it to "Piranha_Disk" and finally fitting the other side of "Piranha_Jaw". (The pin of "Piranha_Disk" should be facing downwards, thus joining "Piranha_Gear".)
5 - Attach "Piranha_Head_Tooth" to "Piranha_Head".
6 - Attach "Piranha_Head" to "Piranha_Axle" with "Piranha_Jaw" already attached.
7 - Your piranha bites now! Good luck!
Starving Piranha, designed by STLFlix and printed to order by FluxCore3D in Mentor-on-the-Lake, Ohio.
Printed in PLA unless you ask otherwise. Want PETG, a different size or a custom color? Ask and I'll quote it.
- Difficulty
- Expert
- Print time
- Very Long (More than 12 hours)
Designed by STLFlix
Design and image by STLFlix. Printed under an STLFlix commercial license.
