- Video and images: Design and image by STLFlix. Printed under an STLFlix commercial license. · source
Product images are the designer's renders until I photograph my own print. Colors and finish of your print will differ.
Patella Des Bones
by STLFlix
From Drop #80 · released September 2023
$95
This price is an estimate, not final. After you order, I work out the exact cost and email it to you. Nothing is charged until you approve that price and pay.
+ shipping, about $10.50 for one (U.S.), shown separately at checkout · or free local pickup
Made to order: At least 4 weeks. First print of this design: I test-print and dial it in before yours, so allow a few extra days.
Skeleton bands only have groupies because their fans have no-body to watch the shows with.
Assembling Instructions:
Take GEAR_1 and tighten the spring with your fingers as shown in the video, and place it inside BODY, fitting the outer hole of the spring onto the pin inside BODY.
Fit GEAR_3 onto GEAR_2 and attach it on top of GEAR_1 so that GEAR_3 is facing downwards.
From the outside, thread GEAR_8 so that the pin goes through the holes of the aligned gears on the inside.
Attach GEAR_4 onto the pin of BODY.
Attach GEAR_5 onto the top of GEAR_3, through the pin of GEAR_8.
Place GEAR_6 on top of GEAR_4.
Fit CHEST_PLATE on top of everything, aligning the pins with the holes and the slots on the side, as shown in the video.
Put GEAR_7 over CHEST_PLATE, fitting it onto the first pin.
Attach CHEST_ELIPSE so that the inner diameter touches GEAR_7, as shown in the video.
Fit CHEST_ELIPSE_SLIDER below CHEST_ELIPSE, in its designated space.
Finish by attaching and gluing the remaining parts, following the assembly from the video.
*LINK TO THE VIDEO*
Patella Des Bones, designed by STLFlix and printed to order by FluxCore3D in Mentor-on-the-Lake, Ohio.
Printed in PLA unless you ask otherwise. Want PETG, a different size or a custom color? Ask and I'll quote it.
- Difficulty
- Master
- Print time
- Very Long (More than 12 hours)
Designed by STLFlix
Design and image by STLFlix. Printed under an STLFlix commercial license.
